Wear has a sound
A bearing that is failing changes the vibration spectrum weeks before it seizes. The energy moves into a narrow band at the bearing's defect frequency and its harmonics. A single RMS number hides that; a band-energy trend against a learned baseline exposes it.
The controller samples the accelerometer at 1–3 kHz for a short window every minute, computes RMS and the band energy, and stores the trend. Current and winding temperature rule out an electrical cause. Speed from a hall sensor keeps the baseline honest across the machine's operating range.
What it catches — and what it does not
- Catches: bearing degradation, imbalance, looseness, belt wear, cavitation, a developing misalignment.
- Catches: an electrical fault through current and thermal cross-checks.
- Does not catch: a sudden fracture with no precursor. No trend system does; that is what inspection and protection relays are for.
- Does not replace: a certified machine-protection system. It informs maintenance; it does not guard a person.
A warning you can plan around, then a stop you can trust.
The threshold is per speed and per machine, learned from the machine itself. A vendor's generic limit is a starting point, not a baseline.
Learn
One week of running at each speed builds the baseline: RMS, band energy, current and thermal. The machine teaches the controller what normal is.
Watch
Every minute is compared against the baseline for the current speed. A 6 dB rise in the bearing band for three hours opens a maintenance ticket.
Trip
At 12 dB, or on a shock event above the learned limit, the controller drops the run-enable. The trip is staged and announced, never a surprise.
Cross-check
A rising current at constant load is mechanical. A rising temperature at constant current is electrical. The pair tells you which trade to call.
Prove the fix
After the repair, the same baseline proves the bearing actually improved. A repair without a before-and-after trend is a story.
Keep it honest
The controller reports its own gaps: a missed sample, a saturated accelerometer, a speed it has never seen. A trend with hidden holes is worse than no trend.
What this build listens to.
3-axis accelerometer
Vibration sampled at 1–3 kHz, with RMS and bearing-band energy computed on the controller.
Current transformer
Motor current to separate a mechanical fault from an electrical one, and to prove the motor is actually running.
Platinum RTD
Winding or bearing temperature with a stable, calibratable reading, not a thermistor guess.
Hall sensor
Shaft speed and position, so every baseline is indexed to the speed the machine was actually running.
Piezo shock sensor
Impact and knock events that a slow RMS trend would smooth away.
Contactor feedback
Proof that the run-enable actually opened when the controller asked it to.
This pattern is reusable.
The same controller, rules and record serve a grow room, a machine, a pump station or a cold room. The sensors and the action change.